| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
M58PR256J Datasheet(PDF) 60 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M58PR256J Datasheet(HTML) 60 Page - STMicroelectronics |
|
60 / 114 page ![]() Dual operations and multiple bank architecture M58PR256J, M58PR512J 60/114 11 Dual operations and multiple bank architecture The Multiple Bank Architecture of the M58PRxxxJ gives greater flexibility for software developers to split the code and data spaces within the memory array. The Dual Operations feature simplifies the software management of the device by allowing code to be executed from one bank while another bank is being programmed or erased. The Dual Operations feature means that while programming or erasing in one bank, read operations are possible in another bank with zero latency (only one bank at a time is allowed to be in Program or Erase mode). If a Read operation is required in a bank, which is programming or erasing, the Program or Erase operation can be suspended. Also if the suspended operation was erase then a Program command can be issued to another Block, so the device can have one Block in Erase Suspend mode, one programming and other banks in Read mode. Bus Read operations are allowed in another bank between setup and confirm cycles of Program or Erase operations. By using a combination of these features, Read operations are possible at any moment in the M58PRxxxJ device. Dual operations between the Extended Flash Array (EFA) and either of the CFI, the OTP or the Electronic Signature memory space are not allowed. Table 20 shows which dual operations are allowed or not between the CFI, the OTP, the Electronic Signature locations and the memory array. Table 18 and Table 19 show the dual operations possible in other banks and in the same bank. Table 18. Dual operations allowed in other banks Status of bank Commands allowed in another bank Read Array Read Status Register Read CFI Query Read Electronic Signature Read EFA Program, Buffer Program Block Erase Program/ Erase Suspend Program/ Erase Resume Idle Yes Yes Yes Yes Yes Yes Yes Yes Yes Programming Yes Yes Yes Yes Yes – – Yes – Erasing Yes Yes Yes Yes Yes – – Yes – Program Suspended Yes Yes Yes Yes Yes – – – Yes Erase Suspended Yes Yes Yes Yes Yes Yes – – Yes |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |