PM0223 datasheet(96/110 Pages) STMICROELECTRONICS

96 / 110 page

STM32L0 Core Peripherals

PM0223

96/110

DocID025763 Rev 1

4.4.1

SysTick Control and Status Register (STK_CSR)

The SYST_CSR enables the SysTick features. See the register summary in Table 33 on

page 95 for its attributes. The bit assignments are:

4.4.2

SysTick Reload Value Register (STK_RVR)

The STK_RVR specifies the start value to load into the SYST_CVR. See the register

summary in Table 33 on page 95 for its attributes. The bit assignments are:

Calculating the RELOAD value

The RELOAD value can be any value in the range 0x00000001-0x00FFFFFF. You can

program a value of 0, but this has no effect because the SysTick exception request and

COUNTFLAG are activated when counting from 1 to 0.

Reserved

rc_r

5432

Reserved

Bits31:17

Reserved, must be kept cleared.

Bit 16

COUNTFLAG Returns 1 if timer counted to 0 since the last read of this register.

Bits 15:3

Reserved, must be kept cleared.

Bit 2

CLKSOURCE Selects the SysTick timer clock source:

0 = External reference clock.

1 = Processor clock.

Bit 1

TICKINT Enables SysTick exception request:

0 = Counting down to zero does not assert the SysTick exception request.

1 = Counting down to zero to asserts the SysTick exception request.

Bit 0

ENABLE Enables the counter:

0 = Counter disabled.

1 = Counter enabled.

Reserved

RELOAD

Bits31:24

Reserved, must be kept cleared.

Bits 23:0

RELOAD Value to load into the STK_CVR when the counter is enabled and when it reaches 0,

see Calculating the RELOAD value on page 96.

PM0223 Datasheet(PDF) 96 Page - STMicroelectronics

PM0223 Datasheet(HTML) 96 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL