PIC17C44 datasheet(14/241 Pages) MICROCHIP

14 / 241 page

PIC17C4X

DS30412C-page 14

3.1

Clocking Scheme/Instruction Cycle

The clock input (from OSC1) is internally divided by

four to generate four non-overlapping quadrature

clocks, namely Q1, Q2, Q3, and Q4. Internally, the pro-

gram counter (PC) is incremented every Q1, and the

instruction is fetched from the program memory and

latched into the instruction register in Q4. The instruc-

tion is decoded and executed during the following Q1

through Q4. The clocks and instruction execution ﬂow

are shown in Figure 3-3.

3.2

Instruction Flow/Pipelining

An “Instruction Cycle” consists of four Q cycles (Q1,

Q2, Q3, and Q4). The instruction fetch and execute are

pipelined such that fetch takes one instruction cycle

while decode and execute takes another instruction

cycle. However, due to the pipelining, each instruction

effectively executes in one cycle. If an instruction

causes the program counter to change (e.g.GOTO) then

two cycles are required to complete the instruction

(Example 3-2).

A fetch cycle begins with the program counter incre-

menting in Q1.

In the execution cycle, the fetched instruction is latched

into the “Instruction Register (IR)” in cycle Q1. This

instruction is then decoded and executed during the

Q2, Q3, and Q4 cycles. Data memory is read during Q2

(operand read) and written during Q4 (destination

write).

FIGURE 3-3:

CLOCK/INSTRUCTION CYCLE

EXAMPLE 3-2:

INSTRUCTION PIPELINE FLOW

OSC1

OSC2/CLKOUT

(RC mode)

PC+1

PC+2

Fetch INST (PC)

Execute INST (PC-1)

Fetch INST (PC+1)

Execute INST (PC)

Fetch INST (PC+2)

Execute INST (PC+1)

Internal

phase

clock

All instructions are single cycle, except for any program branches. These take two cycles since the fetch

instruction is “ﬂushed” from the pipeline while the new instruction is being fetched and then executed.

Tcy0

Tcy1

Tcy2

Tcy3

Tcy4

Tcy5

1. MOVLW 55h

Fetch 1

Execute 1

2. MOVWF PORTB

Fetch 2

Execute 2

3. CALL SUB_1

Fetch 3

Execute 3

4. BSF

PORTA, BIT3 (Forced NOP)

Fetch 4

Flush

5. Instruction @ address SUB_1

Fetch SUB_1 Execute SUB_1

PIC17C44 Datasheet(PDF) 14 Page - Microchip Technology

PIC17C44 Datasheet(HTML) 14 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL