320 datasheet(73/82 Pages) INTEL

73 / 82 page

Datasheet

Boxed Processor Specifications

The Celeron D processor is also offered as a boxed Intel processor. Boxed Intel processors are

intended for system integrators who build systems from baseboards and standard components. The

boxed Celeron D processor will be supplied with a cooling solution. This chapter documents

baseboard and system requirements for the cooling solution that will be supplied with the boxed

Celeron D processor. This chapter is particularly important for OEMs that manufacture baseboards

for system integrators. Unless otherwise noted, all figures in this chapter are dimensioned in

millimeters and inches [in brackets]. Figure 7-1 shows a mechanical representation of a boxed

Celeron D processor.

• Drawings in this section reflect only the specifications on the boxed Intel processor product.

These dimensions should not be used as a generic keep-out zone for all cooling solutions. It is

the system designer's responsibility to consider their proprietary cooling solution when

designing to the required keep-out zone on their system platform and chassis. Refer to the

Intel

® Pentium 4 Processor on 90 nm Process Thermal Design Guidelines for further

guidance. Contact your local Intel Sales Representative for this document.

NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.

Figure 7-1. Mechanical Representation of the Boxed Intel® Celeron® D Processor

320 Datasheet(PDF) 73 Page - Intel Corporation