General description
The TEA19161CT is a fully digital controller for high-efficiency resonant power supplies.
Together with the TEA19162CT PFC controller and the TEA1995T dual SR controller,
a complete resonant power supply can be built which is easy to design and has a very
low component count. This power supply meets the efficiency regulations of Energy Star,
the Department of Energy (DoE), the Eco-design directive of the European Union, the
European Code of Conduct, and other guidelines. So, any auxiliary low-power supply can
be omitted.
In contrast to traditional resonant topologies, the TEA19161CT (LLC) shows a high
efficiency at low loads due to the newly introduced low-power mode. This mode operates
in the power region between continuous switching (also called high-power mode) and
burst mode.
Because the TEA19161CT is regulated via the primary capacitor voltage, it has accurate
information about the power delivered to the output. The measured output power
defines the mode of operation (burst mode, low-power mode, or high-power mode). A
configuration pin can easily set the transition levels of the operating modes.
The TEA19161CT contains a low-voltage die with a fully digital controller for output
power control, start-up, initializations, and protections. These protections include
overcurrent protection (OCP), overvoltage protection (OVP), open-loop protection (OLP),
and capacitive mode regulation (CMR). It also contains a high-voltage silicon-on-insulator
(SOI) controller for high-voltage start-up, integrated drivers, level shifter, protections, and
circuitry assuring zero-voltage switching.
The TEA19161CT is designed to cooperate with the TEA19162CT power factor
control (PFC) controller. For communications about start-up and protections, the
TEA19161CT contains a digital control interface. The digital control enables a fast latch
reset mechanism. It maximizes the overall system efficiency at low output power levels
by setting the TEA19162CT to operate in burst mode.
The TEA19161CT/TEA19162CT/TEA1995T combination gives an easy to design,
highly efficient, and reliable power supply, providing 90 W to 500 W, with a minimum of
external components. The system provides a very low no-load input power (< 75 mW;
total system including the TEA19161CT/TEA19162CT/TEA1995T combination) and high
efficiency from minimum to maximum load. So, any additional low-power supply can be
omitted, ensuring a significant system cost saving and highly simplified power supply
design.

Features and benefits
Distinctive features
• Complete functionality as a combination with TEA19162CT
• Integrated high-voltage start-up
• Integrated high-voltage level shifter (LS)
• Extremely fast start-up (< 500 ms at Vmains = 100 V (AC))
• Continuously VSUPIC regulation via the SUPHV pin during start-up and protection,
allowing minimum SUPIC capacitor values
• Operating frequencies are outside the audible area at all operating modes
• Integrated soft start
• Power good function
• Maximum 500 kHz half-bridge switching frequency

Green features
• Extremely high efficiency from low load to high load
• Compliant with Energy using Product directive (EuP) lot 6
• Excellent no-load input power (< 75 mW for TEA19161CT/TEA19162CT/TEA1995T
combination)
• Regulated low optocurrent, enabling low no-load power consumption
• Very low supply current during non-switching state in burst mode
• Transition between different operation modes (high-power/low-power/burst mode)
occurs at integrated, externally adjustable power levels
• Adaptive non-overlap time

Protection features
• Supply undervoltage protection (UVP)
• Overpower protection (OPP)
• Integrated adjustable overpower timeout
• Adjustable latch or restart function for overpower protection (OPP)
• On-chip overtemperature protection (OTP)
• Capacitive mode regulation (CMR)
• Accurate overvoltage protection (OVP)
• Maximum on-time protection for low-side and high-side driver output
• Overcurrent protection (OCP)
• Disable input