PM0214 datasheet(83/245 Pages) STMICROELECTRONICS

83 / 245 page

DocID022708 Rev 4

83/245

PM0214

The STM32 Cortex-M4 instruction set

244

Restrictions

In these instructions:

•

Operand2 must be neither SP nor PC

•

Rd can be SP only in ADD and SUB, and only with the following additional restrictions:

–

Rn must also be SP

–

Any shift in operand2 must be limited to a maximum of three bits using LSL

•

Rn can be SP only in ADD and SUB

•

Rd can be PC only in the ADD{cond} PC, PC, Rm instruction where:

–

You must not specify the S suffix

–

Rm must be neither PC nor SP

–

If the instruction is conditional, it must be the last instruction in the IT block

•

With the exception of the ADD{cond} PC, PC, Rm instruction, Rn can be PC only in

ADD and SUB, and only with the following additional restrictions:

–

You must not specify the S suffix

–

The second operand must be a constant in the range 0 to 4095

Note:

When using the PC for an addition or a subtraction, bits[1:0] of the PC are rounded to b00

before performing the calculation, making the base address for the calculation word-aligned.

If you want to generate the address of an instruction, you have to adjust the constant based

on the value of the PC. ARM recommends that you use the ADR instruction instead of ADD or

SUB with Rn equal to the PC, because your assembler automatically calculates the correct

constant for the ADR instruction.

When Rd is PC in the ADD{cond} PC, PC, Rm instruction:

•

Bit[0] of the value written to the PC is ignored

•

A branch occurs to the address created by forcing bit[0] of that value to 0

Condition flags

If S is specified, these instructions update the N, Z, C and V flags according to the result.

Examples

ADD R2, R1, R3

SUBS R8, R6, #240

; sets the flags on the result

RSB R4, R4, #1280

; subtracts contents of R4 from 1280

ADCHI R11, R0, R3

; only executed if C flag set and Z flag clear

Multiword arithmetic examples

Specific example 4: 64-bit addition shows two instructions that add a 64-bit integer

contained in R2 and R3 to another 64-bit integer contained in R0 and R1, and place the

result in R4 and R5.

Specific example 4: 64-bit addition

ADDS R4, R0, R2

; add the least significant words

ADC R5, R1, R3

; add the most significant words with carry

PM0214 Datasheet(PDF) 83 Page - STMicroelectronics

PM0214 Datasheet(HTML) 83 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL