Starter System Setup

www.ti.com

2.2

Multi-Cal-System Hardware Setup for Recommended Starter Kit

Figure 8 shows how to connect the Multi-Cal-Master board to the USB DAQ Platform board. The best (and

easiest) way to connect the two components is to gently push on both sides of the DSUB connectors.

Make sure that the two connectors are completely pushed together; loose connections may cause

intermittent EVM operation.

Figure 8. Connect Multi-Cal-Master PCA to USB DAQ Platform

10

Multi-Cal-System Evaluation Module

SBOU087A

– August 2010 – Revised April 2011

Submit Documentation Feedback

Copyright

© 2010–2011, Texas Instruments Incorporated