80960KA datasheet(17/43 Pages) INTEL

No. de pieza	80960KA

Descripción Electrónicos	EMBEDDED 32-BIT MICROPROCESSOR

PDF	43 Pages

Scroll/Zoom	100%

Fabricante Electrónico	INTEL [Intel Corporation]

Página de inicio	http://www.intel.com

Logo

17 / 43 page

80960KA

2.5.

Test Load Circuit

Figure 12 illustrates the load circuit used to test the

80960KA’s three-state pins; Figure 13 shows the load

circuit used to test the open drain outputs. The open

drain test uses an active load circuit in the form of a

matched diode bridge. Since the open-drain outputs

sink current, only the IOL legs of the bridge are

necessary and the IOH legs are not used. When the

80960KA driver under test is turned off, the output pin

is pulled up to VREF (i.e., VOH). Diode D1 is turned off

and the IOL current source flows through diode D2.

When the 80960KA open-drain driver under test is

on, diode D1 is also on and the voltage on the pin

being tested drops to VOL. Diode D2 turns off and IOL

flows through diode D1.

Figure 12. Test Load Circuit for Three-State Output Pins

Figure 13. Test Load Circuit for Open-Drain Output Pins

THREE-STATE OUTPUT

CL = 50 pF for all signals

OPEN-DRAIN OUTPUT

IOL

IOL Tested at 25 mA

VREF = VCC

D1 and D2 are matched

CL = 50 pF for all signals

80960KA Datasheet(PDF) 17 Page - Intel Corporation