| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
L6482 Datasheet(PDF) 29 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6482 Datasheet(HTML) 29 Page - STMicroelectronics |
|
29 / 73 page ![]() L6482 Functional description Doc ID 023768 Rev 2 29/73 6.11 VS undervoltage lockout (UVLO_ADC) The device provides an undervoltage signal of the integrated ADC input voltage (the UVLO_ADC flag in the STATUS register). When VADCIN falls below the VADC,UVLO value, the UVLO_ADC flag is forced low and it is kept in this state until the ADCIN voltage is greater than VADC,UVLO and a GetStatus command is sent to the device. The ADCIN undervoltage event does not turn off the gates of the power bridges. The motor supply voltage undervoltage detection can be performed by means of this feature, connecting the ADCIN pin to VS through a voltage divider. 6.12 Thermal warning and thermal shutdown An integrated sensor allows detection of the internal temperature and implementation of a 3- level protection. When the Tj(WRN)Set threshold is reached, a warning signal is generated. This is the thermal warning condition and it expires when the temperature falls below the Tj(WRN)Rel threshold. When the Tj(OFF)Set threshold is reached, all the gates are turned off and the gate driving circuitry is disabled (Miller clamps are still operative). This condition expires when the temperature falls below the Tj(OFF)Rel threshold. When the Tj(SD)OFF threshold is reached, all the gates are turned off using Miller clamps, the internal VCC voltage regulator is disabled and the current capability of the internal VREG voltage regulator is reduced (thermal shutdown). In this condition, logic is still active (if supplied). The thermal shutdown condition only expires when the temperature goes below Tj(SD)ON. The thermal condition of the device is shown by TH_STATUS bits in the STATUS register (Table 10). Table 9. UVLO thresholds UVLOVAL 01 Low-side gate driver supply turn-off threshold (VCCthOff) 6.3 V 10 V Low-side gate driver supply turn-on threshold (VCCthOn) 6.9 V 10.4 V High-side gate driver supply turn-off threshold ( ΔVBOOTthOff) 5.5 V 8.8 V High-side gate driver supply turn-on threshold ( ΔVBOOTthOff) 6 V 9.2 V |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |