DP35DP datasheet(31/84 Pages) INTEL

31 / 84 page

Product Description

1.13.1.2 ENERGY STAR*

In 2007, the US Department of Energy and the US Environmental Protection Agency

revised the ENERGY STAR* requirements. Intel has worked directly with these two

governmental agencies to define the new requirements. Currently Intel Desktop

Boards meet the new requirements.

For information about

Refer to

ENERGY STAR requirements and recommended configurations

http://www.intel.com/go/energystar

1.13.1.3

Wake-up Devices and Events

Table 8 lists the devices or specific events that can wake the computer from specific

states.

Table 8. Wake-up Devices and Events

These devices/events can wake up the computer…

…from this state

LAN

S1, S3, S4, S5 (Note 1)

PME# signal

S1, S3, S4, S5 (Note 1)

Power switch

S1, S3, S4, S5

PS/2 devices

S1, S3

RTC alarm

S3, S4, S5

Serial port

USB

WAKE# signal

S1, S3, S4, S5

Consumer IR

S1, S3 (S4 and S5) (Note 2)

Notes:

For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to

Power On will enable a wake-up event from LAN in the S5 state.

Wake from S4 and S5 is optional by the specification.

NOTE

The use of these wake-up events from an ACPI state requires an operating system

that provides full ACPI support. In addition, software, drivers, and peripherals must

fully support ACPI wake events.

DP35DP Datasheet(PDF) 31 Page - Intel Corporation