LAN8808DSLASHKDX datasheet(6/80 Pages) MICROCHIP

6 / 80 page

LAN8808D

DS00005833C-page 6

1.2

Buffer Types

TABLE 1-2:

BUFFER TYPE DESCRIPTIONS

Buffer

Description

Analog input

Analog output

AIO

Analog bidirectional

GND

Ground pin

ICLK

Single-ended clock reference input pin

LVDS1

LVDS1 input pin

SRL

Slew Rate Limited output

VIS

Variable voltage Schmitt-triggered input

VO12

Variable voltage output with 12 mA sink and 12 mA source

VOD12

Variable voltage open-drain output with 12 mA sink

VOS12

Variable voltage open-source output with 12 mA source

70 kΩ (typical) internal pull-up. Unless otherwise noted in the pin description, internal pull-ups

are always enabled.

Note:

Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on

internal resistors to drive signals external to the device. When connected to a load

that must be pulled high, an external resistor must be added.

70 kΩ (typical) internal pull-down. Unless otherwise noted in the pin description, internal pull-

downs are always enabled.

Note:

Internal pull-down resistors prevent unconnected inputs from floating. Do not rely on

internal resistors to drive signals external to the device. When connected to a load

that must be pulled low, an external resistor must be added.

Power pin

Note:

Digital signals are not 5V tolerant unless specified.

LAN8808D/KDX Datasheet(PDF) 6 Page - Microchip Technology

LAN8808D/KDX Datasheet(HTML) 6 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Datasheet Descarga

Enlace URL