| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
ADF41513 Datasheet(PDF) 3 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADF41513 Datasheet(HTML) 3 Page - Analog Devices |
|
3 / 30 page ![]() Data Sheet ADF41513 Rev. 0 | Page 3 of 30 SPECIFICATIONS AVDDx = AVDD1 = AVDD2 = AVDD3 = AVDD4 = AVDD5 = VP = 3.3 V ± 5%, GND = 0 V, RSET = 1.8 kΩ, dBm referred to 50 Ω, TA = TMIN (−40°C) to TMAX (+105°C), unless otherwise noted. Table 1. Parameter Min Typ Max Unit Test Conditions/Comments RADIO FREQUENCY (RF) CHARACTERISTICS 8/9 Prescaler RF Input Frequency (fRFIN) Range 1 26.5 GHz Recommended input power of −5 dBm to +5 dBm, operation at this frequency range is limited to 70°C to TMIN 1 24 GHz Operation at this frequency range is TMAX to TMIN RF Input Sensitivity −11 dBm Refer to Figure 10 and Figure 11 for more information 4/5 Prescaler fRFIN Range 1 16 GHz For lower frequencies, ensure slew rate > 320 V/µs RF Input Sensitivity Range −7 +5 dBm Measured single-ended to RFINA via a 1 pF series capacitor, 1 pF capacitor to GND on RFINB INPUT REFERENCE FREQUENCY (REFIN) CHARACTERISTICS REFIN Input Frequency 10 800 MHz Voltage Range 0 1.8 V Sensitivity Range −10 8 dBm Biased at 1 V (ac coupling ensures 1 V bias), use square wave at low power and/or frequency to ensure slew rate is > 320 V/µs; for best inband phase noise performance, ensure slew rate > 500 V/µs Capacitance 10 pF Current ±150 µA Doubler Input Frequency 225 MHz Maximum reference frequency when the doubler is enabled MAXIMUM PFD FREQUENCY Integer N Mode 250 MHz Fractional-N Mode 125 MHz N DIVIDER RANGE 16-Bit N Divider Range Integer N Mode 20 511 4/5 prescaler 64 1023 8/9 prescaler Fractional-N Mode 23 511 4/5 prescaler 75 1023 8/9 prescaler CHARGE PUMP (CP) CP Current (ICP) Sink and Source Programmable High Value 7.2 mA With RSET = 1.8 kΩ Low Value 0.45 mA Absolute Accuracy 5 % With RSET = 1.8 kΩ RSET Range 1.8 2.7 10 kΩ 5% accuracy ICP Three-State Leakage 2 nA VCP = 0.9 V, TA = 25°C Sink and Source Current Matching 5 % 0.7 V ≤ CP voltage (VCP) ≤ VP − 0.7 V ICP vs. VCP 5 % 0.7 V ≤ VCP ≤ VP − 0.7 V ICP vs. Temperature 5 % VCP = VP/2 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |