TNETV2664FIBZWT datasheet(155/249 Pages) TI1

155 / 249 page

TMS320C6424

www.ti.com

SPRS347D – MARCH 2007 – REVISED DECEMBER 2009

6.5.8

Pin Behaviors at Reset

During normal operations, pins are controlled by the respective peripheral selected in the PINMUX0 or

PINMUX1 register. During device level global reset, the pin behaves as follows:

Multiplexed Boot and Configuration Pins

These pins are forced 3-stated when RESETOUT is asserted (low). This is to ensure the proper boot and

configuration values can be latched on these multiplexed pins. This is particularly useful in the case where

the boot and configuration values are driven by an external control device. After RESETOUT is

deasserted (high), these pins are controlled by their respective default peripheral.

•

Boot and Configuration Pins Group: RMTXD0/GP[28]/(8_16), RMTXD1/GP[27](LENDIAN),

GP[26]/(FASTBOOT), GP[25]/(BOOTMODE3), GP[24]/(BOOTMODE2), GP[23]/(BOOTMODE1),

GP[22]/(BOOTMODE0), EM_A[4]/GP[10]/(PLLMS2), EM_A[1]/(ALE)/GP[9]/(PLLMS1),

EM_A[2]/(CLE)/GP[8]/(PLLMS0), EM_A[0]/GP[7]/(AEM2), EM_BA[0]/GP[6]/(AEM1), and

EM_BA[1]/GP[5]/(AEM0).

For information on whether external pullup/pulldown resistors should be used on the boot and

configuration pins, see Section 3.9.1, Pullup/Pulldown Resistors.

Default Power Down Pins

As discussed in Section 3.2, Power Considerations, the VDD3P3V_PWDN register controls power to the

3.3-V pins. The VDD3P3V_PWDN register defaults to powering down some 3.3-V pins to save power. For

more details on the VDD3P3V_PWDN register and which 3.3-V pins default to powerup or powerdown,

Section 3.2, Power Considerations. The pins that default to powerdown, are both reset to powerdown and

high-impedance. They remain in that state until configured otherwise by VDD3P3_PWDN and

PINMUX0/PINMUX1 programming.

•

Default Power Down Pin Group: GP[4]/PWM1, ACLKR0/CLKX0/GP[99], AFSR0/DR0/GP[100],

AHCLKR0/CLKR0/GP[101], AXR0[3]/FSR0/GP[102], AXR0[2]/FSX0/GP[103], AXR0[1]/DX0/GP[104],

AXR0/FSR1/GP[105], ACLKX0/CLKX1/GP[106], AFSX0/DX1/GP[107], AHCLKX0/CLKR1/GP[108],

AMUTEIN0/FSX1/GP[109], AMUTE0/DR1/GP[110], TOUT1L/UTXD1/GP[55], TINP1L/URXD1/GP[56],

CLKS0/TOUT0L/GP[97], CLKS1/TINP0L/GP[98], URXD0/GP[85], UTXD0/GP[86], UCTS0/GP[87], and

URTS0/PWM0/GP[88].

All Other Pins

During RESETOUT assertion (low), all other pins are controlled by the default peripheral. The default

peripheral is determined by the default settings of the PINMUX0 or PINMUX1 registers.

Some of the PINMUX0/PINMUX1 settings are determined by configuration pins latched at reset. To

determine the reset behavior of these pins, see Section 3.7, Multiplexed Pin Configurations and read the

rest of the this subsection to understand how that default peripheral controls the pin.

The reset behaviors for all these other pins are categorized as follows (also see Figure 6-7 and Figure 6-8

in Section 6.5.9, Reset Electrical Data/Timing):

•

Z+/Low Group (Z Longer-to-Low Group): These pins are 3-stated when device-level global reset

source (e.g., POR, RESET or Max Reset) is asserted. These pins remain 3-stated throughout

RESETOUT assertion. When RESETOUT is deasserted, these pins drive a logic low.

•

Z+/High Group (Z Longer-to-High Group): These pins are 3-stated when device-level global reset

source (e.g., POR, RESET or Max Reset) is asserted. These pins remain 3-stated throughout

RESETOUT assertion. When RESETOUT is deasserted, these pins drive a logic high.

•

Z+/Invalid Group (Z Longer-to-Invalid Group): These pins are 3-stated when device-level global

reset source (e.g., POR, RESET or Max Reset) is asserted. These pins remain 3-stated throughout

RESETOUT assertion. When RESETOUT is deasserted, these pins drive an invalid value until

configured otherwise by their respective peripheral (after the peripheral is enabled by the PSC).

•

Z Group: These pins are 3-stated by default, and these pins remain 3-stated throughout RESETOUT

assertion. When RESETOUT is deasserted, these pins remain 3-stated until configured otherwise by

Peripheral Information and Electrical Specifications

155

Submit Documentation Feedback

Product Folder Link(s): TMS320C6424

TNETV2664FIBZWT Datasheet(PDF) 155 Page - Texas Instruments

TNETV2664FIBZWT Datasheet(HTML) 155 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL