| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
STM32F091CB Datasheet(PDF) 89 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F091CB Datasheet(HTML) 89 Page - STMicroelectronics |
|
89 / 127 page ![]() DocID026284 Rev 3 89/127 STM32F091xB STM32F091xC Electrical characteristics 99 6.3.17 DAC electrical specifications Table 60. DAC characteristics Symbol Parameter Min Typ Max Unit Comments VDDA Analog supply voltage for DAC ON 2.4 - 3.6 V RLOAD(1) Resistive load with buffer ON 5- - k Ω Load is referred to ground RO(1) Impedance output with buffer OFF -- 15 k Ω When the buffer is OFF, the Minimum resistive load between DAC_OUT and VSS to have a 1% accuracy is 1.5 M Ω CLOAD(1) Capacitive load - - 50 pF Maximum capacitive load at DAC_OUT pin (when the buffer is ON). DAC_OUT min(1) Lower DAC_OUT voltage with buffer ON 0.2 - - V It gives the maximum output excursion of the DAC. It corresponds to 12-bit input code (0x0E0) to (0xF1C) at VDDA = 3.6 V and (0x155) and (0xEAB) at VDDA = 2.4 V DAC_OUT max(1) Higher DAC_OUT voltage with buffer ON -- VDDA – 0.2 V DAC_OUT min(1) Lower DAC_OUT voltage with buffer OFF -0.5 - mV It gives the maximum output excursion of the DAC. DAC_OUT max(1) Higher DAC_OUT voltage with buffer OFF -- VDDA – 1LSB V IDDA(1) DAC DC current consumption in quiescent mode(2) -- 600 µA With no load, middle code (0x800) on the input -- 700 µA With no load, worst code (0xF1C) on the input DNL(3) Differential non linearity Difference between two consecutive code-1LSB) -- ±0.5 LSB Given for the DAC in 10-bit configuration -- ±2 LSB Given for the DAC in 12-bit configuration INL(3) Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) -- ±1 LSB Given for the DAC in 10-bit configuration -- ±4 LSB Given for the DAC in 12-bit configuration Offset(3) Offset error (difference between measured value at Code (0x800) and the ideal value = VDDA/2) -- ±10 mV -- ±3 LSB Given for the DAC in 10-bit at VDDA = 3.6 V -- ±12 LSB Given for the DAC in 12-bit at VDDA = 3.6 V Gain error(3) Gain error - - ±0.5 % Given for the DAC in 12-bit configuration |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |