| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
PC87591L Datasheet(PDF) 305 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87591L Datasheet(HTML) 305 Page - National Semiconductor (TI) |
|
305 / 437 page ![]() Host Controller Interface Modules (Continued) Revision 1.07 305 www.national.com Shared Memory Indirect Memory Data Register (SMIMD) This register defines data bits 7-0 for a read or write transaction to the memory. Location: Offset 0416 Type: R/W Shared Memory Host Control Register (SMHC) This register controls the embedded flash operation modes for host-initiated transactions. The register is cleared (0016)on Host Domain Hardware reset. Location: Offset 0516 Type: R/W Shared Memory Host Status Register (SMHST) This register provides the embedded flash status for host initiated transactions. The register is cleared (0016) on Host Do- main Hardware reset. Location: Offset 0616 Type: Varies per bit Bit 76543210 Name Indirect Memory Data 7-0 Bit Description 7-0 Indirect Memory Data 7-0. Bit 76543210 Name Reserved PMER Reserved Reset 00000000 Bit Description 4-0 Reserved. 5 PMER (Page Erase). When the bit is set (1), a valid host write to the embedded flash erases the entire page pointed to by the write address. This bit can be altered only when HBUSY bit is cleared (0); otherwise results are undefined. 7-6 Reserved. Bit 76543210 Name Reserved HDERR FMLFULL HBUSY HPERR HEERR Reset 00000000 Bit Type Description 0 R/W1C HEERR (Host Erase Error). The bit is set (1) when an error occurs during a host-initiated erase. The bit is cleared by writing 1 to it. This bit can be cleared only when HBUSY bit is cleared (0). 1 R/W1C HPERR (Host Program Error). The bit is set (1) when an error occurs during a host-initiated program. The bit is cleared by writing 1 to it. This bit can be cleared only when HBUSY bit is cleared (0). 2RO HBUSY (Host Busy). Read only. The bit is set (1) when the embedded flash is busy programing or erasing the flash due to a host-initiated operation. 3RO FMLFULL (Double Buffer Full). Read only. The bit is set (1) when the double buffer is full. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |