STAC9704 datasheet(29/49 Pages) HYNIX

No. de pieza	STAC9704

Descripción Electrónicos	Multimedia Audio Codec for AC97

PDF	49 Pages

Scroll/Zoom	100%

Fabricante Electrónico	HYNIX [Hynix Semiconductor]

Página de inicio	http://www.skhynix.com/kor/main.do

Logo

29 / 49 page

SigmaTel, Inc.

STAC9704/7

10/02/98

4.4.6 Record Gain Registers (Index 1Ch)

The 1Ch register adjusts stereo input record gain.

Each step corresponds to 1.5 dB.

22.5 dB

corresponds to 0F0Fh and 000Fh respectively. The MSB of the register is the mute bit. When this bit

is set to 1, the level for that channel(s) is set at -

∞ dB.

The default value is 8000h, which corresponds to 0 dB gain with mute on.

Table 14: Record Gain Registers

MUTE

GX3… GX0

FUNCTION

1111

+22.5 dB gain

0000

0 dB gain

xxxx

∞ gain

4.4.7

General Purpose Register (Index 20h)

This register is used to control some miscellaneous functions. Below is a summary of each bit and its

function. The MS bit controls the mic selector. The LPBK bit enables loopback of the ADC output to

the DAC input, without involving the AC-link, allowing for full system performance measurements.

Table 15: General Purpose Register

BIT

FUNCTION

3D Stereo Enhancement on/off 1 = on

MIX

Mono output select 0 = Mix, 1= Mic

Mic select 0 = Mic1, 1 = Mic2

LPBK

ADC/DAC loopback mode

STAC9704 Datasheet(PDF) 29 Page - Hynix Semiconductor