RX610

Renesas Starter Kit Sample Code for CubeSuite+

R20AN0274EJ0100 Rev. 1.00

Page 3 of 6

Jan. 17, 2014

4.

Deleting Sub-Projects that are not to be Used (When Using the Sample Code)

The building process builds all projects in the Project Tree, including non-active sub-projects.

Sub-projects that you don’t intend to use can be deleted from the Project Tree by the method shown below.

4.1

How to delete sub-projects

Select and right-click on sub-projects for peripheral functions that are not to be used from the Project Tree (selecting

multiple sub-projects is possible by also using the [Ctrl] key or [Shift] key). This opens the context menu. Select

[Remove from Project].

5.

Changing the Debug Tool

When the active debug tool is not the E1 emulator [RX E1(JTAG)], you will need to change the debug tool.

Confirm the active debug tool by referring to “debug tool” in the Project Tree.

When the debug tool is not [RX E1(JTAG)], select [Debug] -> [Using Debug Tool] -> [RX E1(JTAG)] from the menu.

When the debug tool is [RX E1(JTAG)], changing the debug tool is not necessary.

RX E1(JTAG) is the active

debug tool in this example.