MPC8610EC datasheet(69/96 Pages) FREESCALE

No. de pieza	MPC8610EC

Descripción Electrónicos	Integrated Host Processor Hardware Specifications

PDF	96 Pages

Scroll/Zoom	100%

Fabricante Electrónico	FREESCALE [Freescale Semiconductor, Inc]

Página de inicio	http://www.freescale.com

Logo

69 / 96 page

Electrical Characteristics

MPC8610 Integrated Host Processor Hardware Specifications, Rev. 0

Freescale Semiconductor

NOTE

The reference impedance for return loss measurements is 50

Ω to ground for both the D+

and D– line (i.e., as measured by a vector network analyzer with 50-

Ω probes—see

Figure 43). Note that the series capacitors, CTX, are optional for the return loss

measurement.

Figure 42. Minimum Receiver Eye Timing and Voltage Compliance Specification

2.18.5.1

Compliance Test and Measurement Load

The AC timing and voltage parameters must be verified at the measurement point, as specified within 0.2 inches of the package

pins, into a test/measurement load shown in Figure 43.

NOTE

The allowance of the measurement point to be within 0.2 inches of the package pins is

meant to acknowledge that package/board routing may benefit from D+ and D– not being

exactly matched in length at the package pin boundary.

Figure 43. Compliance Test/Measurement Load

MPC8610EC Datasheet(PDF) 69 Page - Freescale Semiconductor, Inc