STV8217 datasheet(62/156 Pages) STMICROELECTRONICS

62 / 156 page

STV82x7

62/156

12.2

STV82x7 General Control Registers

CUT_ID

Version Identification

RESET

Software Reset Register

Description

The built-in Automatic Standard Recognition System (Autostandard) can be disabled. In this case,

the Software Reset function (bits SOFT_LRST1 and SOFT_LRST2) can be used to implement the

Automatic Standard Recognition by I²C Software. This is not required if the built-in Automatic

Standard Recognition System function is used (default).

Address: 00h

Type: R

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

CUT_NUMBER[5:0]

Bit Name

Reset

Function

Bits[7:6]

Reserved

CUT_NUMBER[5:0]

000001

Dice Version Identification

Address: 01h

Type: R/W

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

BUS_EXP

I²S_OUTPUT

EN_STBY

SOFT_LRST2 SOFT_LRST1

SOFT_RST

Bit Name

Reset

Function

BUS_EXP

Static control by I2C of hardware pin BUS_EXP

I²S_OUTPUT

0: I²S Input (I2S_DATA0 , I2S_SCLK, I2S_LR_CLK, I2S_PCM_CLK in input mode)

1: I²S Output (I2S_DATA0 , I2S_SCLK, I2S_LR_CLK, I2S_PCM_CLK in output mode, 512 x Fs will

be provided on the I2S_PCM_CLK pin)

Bit[5]

Reserved.

EN_STBY

Standby mode enabling

0: Normal mode

1: To lock the digital signals before to settle the device in standby mode

Bit 3

Reserved.

SOFT_LRST2

Softreset (active high) of Channel 2 detectors only.

SOFT_LRST1

Softreset (active high) of Channel 1 detectors only.

SOFTR_RST

General softreset (active high) to reset all hardware registers except for I²C data.

STV8217 Datasheet(PDF) 62 Page - STMicroelectronics

STV8217 Datasheet(HTML) 62 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL