STM32F101X6 datasheet(49/74 Pages) STMICROELECTRONICS

49 / 74 page

STM32F101xx

Electrical characteristics

49/74

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink

+20 mA (with a relaxed VOL).

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 5.2:

●

The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

IVDD (see Table 5).

●

The sum of the currents sunk by all the I/Os on VSS plus the maximum Run

consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating

IVSS (see Table 5).

Output voltage levels

Unless otherwise specified, the parameters given in Table 34 are derived from tests

performed under ambient temperature and VDD supply voltage conditions summarized in

Table 7. All I/Os are CMOS and TTL compliant.

Table 34.

Output voltage characteristics

Symbol

Parameter

Conditions

Min

Max

Unit

VOL

(1)

The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 5

and the sum of IIO (I/O ports and control pins) must not exceed IVSS.

Output Low level voltage for an I/O pin

when 8 pins are sunk at the same time

TTL port,

IIO = +8 mA,

2.7 V < VDD < 3.6 V

0.4

VOH

(2)

The IIO current sourced by the device must always respect the absolute maximum rating specified in

Table 5 and the sum of IIO (I/O ports and control pins) must not exceed IVDD.

Output High level voltage for an I/O pin

when 8 pins are sourced at the same time

VDD–0.4

VOL

(1)

Output low level voltage for an I/O pin

when 8 pins are sunk at the same time

CMOS port

IIO = +8 mA

2.7 V < VDD < 3.6 V

0.4

VOH

(2)

Output high level voltage for an I/O pin

when 8 pins are sourced at the same time

2.4

VOL

(1)

Output low level voltage for an I/O pin

when 8 pins are sunk at the same time

IIO = +20 mA

(3)

2.7 V < VDD < 3.6 V

Based on characterization data, not tested in production.

1.3

VOH

(2)

Output high level voltage for an I/O pin

when 8 pins are sourced at the same time

VDD–1.3

VOL

(1)

Output low level voltage for an I/O pin

when 8 pins are sunk at the same time

IIO = +6 mA

(3)

2 V < VDD < 2.7 V

0.4

VOH

(2)

Output high level voltage for an I/O pin

when 8 pins are sourced at the same time

VDD–0.4

STM32F101X6 Datasheet(PDF) 49 Page - STMicroelectronics

STM32F101X6 Datasheet(HTML) 49 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Datasheet Descarga

Enlace URL