There is a range of example projects in the examples directory in ESP-WHO. You can

copy any project in the same way as presented above and run it.

It is also possible to build examples in-place, without copying them first.

Step 6. Connect Your Device

Now connect your ESP32 board to the computer and check under what serial port the

board is visible.

Serial ports have the following patterns in their names:

Linux: starting with /dev/tty

Step 7. Configure

Navigate to your recognition_solution directory from Step 5 Start a Project and run the

project confuguration uility menuconfig.

cd ~\esp\ recognition_solution

idf.py menuconfig

If the previous steps have been done correctly, the following menu appears:

Step 8. Build the Project

Build the project by running:

idf.py build