LM4947, LM4947TLEVAL

www.ti.com

SNAS349D – JUNE 2006 – REVISED MAY 2013

LM4947

Mono Class D and Stereo Audio Sub-System

with OCL Headphone Amplifier and TI 3D

Check for Samples: LM4947, LM4947TLEVAL

1

FEATURES

DESCRIPTION

The LM4947 is an audio subsystem capable of

2

•

I2C Control Interface

efficiently delivering 500mW (Class D operation) of

•

I2C Programmable Texas Instruments 3D

continuous average power into a mono 8

Ω bridged-

Audio

tied load (BTL) with 1% THD+N, 37mW (Class AB

•

I2C Controlled 32 Step Digital Volume Control

operation) power channel of continuous average

power into stereo 32

Ω single-ended (SE) loads with

(-59.5dB to +18dB)

1% THD+N, or an output capacitor-less (OCL)

•

Three Independent Volume Channels (Left,

configuration with identical specification as the SE

Right, Mono)

configuration, from a 3.3V power supply.

•

Eight Distinct Output Modes

The LM4947 has six input channels: one pair for a

•

Small, 25–Bump DSBGA Packaging

two-channel stereo signal, the second pair for a

•

“Click and Pop” Suppression Circuitry

secondary two-channel stereo input, and the third pair

for

a

differential

single-channel

mono

input.

•

Thermal Shutdown Protection

Additionally, the two sets of stereo inputs may be

•

Low Shutdown Current (0.1

μA, typ)

configured as a single stereo differential input

•

RF Suppression

(differential left and differential right). The LM4947

features a 32-step digital volume control and eight

•

Differential Mono and Stereo Inputs

distinct output modes. The digital volume control, 3D

•

Stereo Input Mux

enhancement, and output modes are programmed

through a two-wire I2C compatible interface that

KEY SPECIFICATIONS

allows flexibility in routing and mixing audio channels.

•

THD+N at 1kHz, 500mW

into 8

Ω BTL (3.3V):

The RF suppression circuitry in the LM4947 makes it

1.0% (typ)

well-suited

for

GSM

mobile

phones

and

other

•

THD+N at 1kHz, 37mW

into 32

Ω SE (3.3V):

portable applications in which strong RF signals

1.0% (typ)

generated by an antenna (and long output traces)

may couple audibly into the amplifier.

•

Single Supply Operation (VDD): 2.7 to 5.5 V

The LM4947 is designed for cellular phones, PDAs,

•

I2C Single Supply Operation: 2.2 to 5.5 V

and other portable handheld applications. It delivers

high quality output power from a surface-mount

APPLICATIONS

package and requires only eight external components

•

Mobile Phones

in the OCL mode (two additional components in SE

mode).

•

PDAs

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 2006–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.