PIC16F688-ESLASHSLSQTP datasheet(17/202 Pages) MICROCHIP

17 / 202 page

DS41203D-page 15

PIC16F688

2.2.2.3

INTCON Register

The INTCON register is a readable and writable

for TMR0 register overflow, PORTA change and

external RA2/INT pin interrupts.

Note:

Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit or the global

enable bit, GIE of the INTCON register.

User software should ensure the appropri-

ate interrupt flag bits are clear prior to

enabling an interrupt.

INTCON: INTERRUPT CONTROL REGISTER

R/W-0

R/W-x

GIE

PEIE

T0IE

INTE

RAIE

T0IF

INTF

RAIF

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7

GIE: Global Interrupt Enable bit

= Enables all unmasked interrupts

= Disables all interrupts

bit 6

PEIE: Peripheral Interrupt Enable bit

= Enables all unmasked peripheral interrupts

= Disables all peripheral interrupts

bit 5

T0IE: Timer0 Overflow Interrupt Enable bit

= Enables the Timer0 interrupt

= Disables the Timer0 interrupt

bit 4

INTE: RA2/INT External Interrupt Enable bit

= Enables the RA2/INT external interrupt

= Disables the RA2/INT external interrupt

bit 3

RAIE: PORTA Change Interrupt Enable bit(1)

= Enables the PORTA change interrupt

= Disables the PORTA change interrupt

bit 2

T0IF: Timer0 Overflow Interrupt Flag bit(2)

= Timer0 register has overflowed (must be cleared in software)

= Timer0 register did not overflow

bit 1

INTF: RA2/INT External Interrupt Flag bit

= The RA2/INT external interrupt occurred (must be cleared in software)

= The RA2/INT external interrupt did not occur

bit 0

RAIF: PORTA Change Interrupt Flag bit

= When at least one of the PORTA <5:0> pins changed state (must be cleared in software)

= None of the PORTA <5:0> pins have changed state

Note 1:

IOCA register must also be enabled.

T0IF bit is set when TMR0 rolls over. TMR0 is unchanged on Reset and should be initialized before

clearing T0IF bit.

PIC16F688-E/SLSQTP Datasheet(PDF) 17 Page - Microchip Technology

PIC16F688-E/SLSQTP Datasheet(HTML) 17 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL