HT360 datasheet(38/46 Pages) HANTEK

No. de pieza	HT360

Descripción Electrónicos	Leeb Hardness Tester

PDF	46 Pages

Scroll/Zoom	100%

Fabricante Electrónico	HANTEK [Qingdao Hantek Electronic Co., Ltd.]

Página de inicio	http://www.hantek.com/

Logo

38 / 46 page

Troubleshooting

HT360 series user manual

Troubleshooting

1. If the power key is pressed, the screen is still black without any display.

1) Plug in the charger. If the instrument is on, the battery is dead or damaged. Charge

or replace the battery.

2) After the above check, restart the instrument.

3) If you still cannot use this product normally, please contact Hantek.

2. The screen display is too dark to see clearly

1) Check whether the brightness value of the LCD screen is too small. Press the

System > Backlight, press the direction keys

to select the backlight, and

press

to change the brightness of the LCD screen to an appropriate state.

2) Check the backlight time setting. Press System > Backlight, press the direction

keys

to select the backlight time, and press

to change the screen

backlight time.

3. The instrument does not display the measured value

The sensor cable is faulty. Replace the sensor cable.

HT360 Datasheet(PDF) 38 Page - Qingdao Hantek Electronic Co., Ltd.