| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
MCP2518FD Datasheet(PDF) 2 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2518FD Datasheet(HTML) 2 Page - Microchip Technology |
|
2 / 96 page ![]() MCP2518FD DS20006027A-page 2 2019 Microchip Technology Inc. 1.0 DEVICE OVERVIEW The MCP2518FD device is a cost-effective and small-footprint CAN FD controller that can be easily added to a microcontroller with an available SPI interface. A CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or doesn’t have enough CAN FD channels. MCP2518FD supports both CAN frames in the Classical format (CAN2.0B) and CAN Flexible Data Rate (CAN FD) format, as specified in ISO 11898-1:2015. The MCP2518FD device was improved as follows: • Added Low Power Mode (LPM), in order to reduce leakage current to 10 A over the full temperature range. • Extended SEQ field in Transmit Message Object and Transmit Event FIFO Object from 7 to 23 bits. • Added DEVID register to distinguish between future members of the device family. • Switched to saw cut DFN package with wettable flanks. 1.1 Block Diagram Figure 1.1 shows the block diagram of the MCP2518FD device. MCP2518FD contains the following main blocks: • The CAN FD Controller module implements the CAN FD protocol, and contains the FIFOs and Filters. • The SPI interface is used to control the device by accessing Special Function Registers (SFR) and RAM. • The RAM controller arbitrates the RAM accesses between the SPI and CAN FD Controller module. • The Message RAM is used to store the data of the Message Objects. • The oscillator generates the CAN clock. • The Internal LDO and POR circuit. • The I/O control. FIGURE 1-1: MCP2518FD BLOCK DIAGRAM Note 1: This data sheet summarizes the features of the MCP2518FD device. It is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to the related section of the “MCP25xxFD Family Reference Manual”. I/O Message RAM TXCAN RXCAN INT INT0/GPIO0/XSTBY RAM Controller nCS SCK SDI SDO INT1/GPIO1 CAN FD Controller Module CLKO/SOF OSC1 OSC2 Oscillator VDD VSS RX Filter POR Internal LDO SPI Interface |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |