8

 2. Receptacle

(1) Recommended reflow

temperature profile

[reference]

1. The temperatures indicated are the surface temperatures on the printed circuit board

at the points of contact with the terminals.

2. Reflow soldering should be performed at peak temperature of 250°C or less at the

surface of the printed circuit board.

3. The temperature profile varies depending on conditions such as the size of the printed

circuit board, the solder paste type, and solder thickness.

(2) Recommended metal

mask thickness

0.1mm

(3) Reflow cycles

2 times

 3. Operating Environment and Storage Conditions

（1）

Operating environment

This product was designed under the assumption that it would be used in a normal

operating environment. Use of this connector under adverse environmental conditions

such as those described below is not advised and may lead to discoloration or other

kinds of degradation.

・Regions having exposure to excessive amounts of fine particles and dust

・Areas with high densities of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other

corrosive gases. (e.g., exhaust gas from automobiles or factories)

・Environments having a large difference in temperature, such as near a heater.

（2）

Storage conditions

Store the product in Hirose Electric's packaging or similar packaging conditions.

Temperature : -10 to +40°C, humidity : 85% or less (recommended storage conditions)

Use the product within six months from delivery.

Products for which the storage period has expired must be tested for solderability

before the use.

Soldering profile for lead free solder (reference)

250

230

220

200

180

130

100

50

0

10 sec. or less

120 seconds or less

Preheat time

50 seconds or less

60 seconds or less

Soldering time

Time (seconds)

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 01/2022. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

https://www.hirose.com/