Write to Camera

VV5430

CD5430F-A

30/33

Setup Code_3

Header Code = 1110

Valid data bits: 7

This register stores data used during sensor synchronisation and when the pixel counter in the video timing logic is reset, either at

the end of a video line or when the sensor is forced to synchronise externally.

Note: Enable SNO adjusts the timing of the FST signal (output on pin 36) to correctly synchronise external slave cam-

eras. Alternatively, the synchronising signal for all cameras can be generated externally, which may be more useful in

image processing applications.

Bit

Function

Default

Comment

5:0

Video timing pixel counter offset

3

Variable offset that is added to the fixed pixel

counter preset value when the counter is reset, at

the end of a video line or when an external syn-

chronisation is applied

6

Enable SNO

0

Synchronising signal to other cameras in multi-

camera applications (see Note)

11:7

Not used

0

Table 23 : Set-Up Code_3