PPC5604BAMLL6R datasheet(32/109 Pages) NXP

32 / 109 page

MPC5604B/C Microcontroller Data Sheet, Rev. 15

Package pinouts and signal descriptions

NXP Semiconductors

2.11

NVUSRO register

Bit values in the Non-Volatile User Options (NVUSRO) Register control portions of the device

configuration, namely electrical parameters such as high voltage supply and oscillator margin, as well as

digital functionality (watchdog enable/disable after reset).

For a detailed description of the NVUSRO register, please refer to the device reference manual.

2.11.1

NVUSRO[PAD3V5V] field description

The DC electrical characteristics are dependent on the PAD3V5V bit value. Table 8 shows how

NVUSRO[PAD3V5V] controls the device configuration.

2.11.2

NVUSRO[OSCILLATOR_MARGIN] field description

The fast external crystal oscillator consumption is dependent on the OSCILLATOR_MARGIN bit value.

Table 9 shows how NVUSRO[OSCILLATOR_MARGIN] controls the device configuration.

2.11.3

NVUSRO[WATCHDOG_EN] field description

The watchdog enable/disable configuration after reset is dependent on the WATCHDOG_EN bit value.

Table 10 shows how NVUSRO[WATCHDOG_EN] controls the device configuration.

Table 8. PAD3V5V field description

Value1

1 Default manufacturing value is ‘1’. Value can be programmed by customer in Shadow Flash.

Description

High voltage supply is 5.0 V

High voltage supply is 3.3 V

Table 9. OSCILLATOR_MARGIN field description

Value1

1 Default manufacturing value is ‘1’. Value can be programmed by customer in Shadow Flash.

Description

Low consumption configuration (4 MHz/8 MHz)

High margin configuration (4 MHz/16 MHz)

Table 10. WATCHDOG_EN field description

Value1

1 Default manufacturing value is ‘1’. Value can be programmed by customer in Shadow Flash.

Description

Disable after reset

Enable after reset

PPC5604BAMLL6R Datasheet(PDF) 32 Page - NXP Semiconductors