ADP3418

Rev. B | Page 4 of 16

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VCC

–0.3 V to +15 V

BST

DC

–0.3 V to VCC + 15 V

<200 ns

–0.3 V to 36 V

BST to SW

–0.3 V to +15 V

SW

DC

–5 V to +15 V

< 200 ns

–10 V to +25 V

DRVH

SW – 0.3 V to BST + 0.3 V

DRVL (< 200 ns)

–2 V to VCC + 0.3 V

All Other Inputs and Outputs

–0.3 V to VCC + 0.3 V

Operating Ambient Temperature

Range

0°C to 85°C

Operating Junction Temperature

Range

0°C to 150°C

Storage Temperature Range

–65°C to +150°C

Junction-to-Air Thermal Resistance

2-Layer Board

123°C/W

4-Layer Board

90°C/W

Lead Temperature (Soldering, 10 s)

300°C

Infrared (15 s)

260°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability. Absolute maximum ratings apply individually

only, not in combination. Unless otherwise specified, all voltages

are referenced to PGND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.