M7F

15

Attaching Color Plate

Insert the projecting parts of the color plate into the square holes of

the case to attach the color plate to the case.

DIP Switch Settings

The DIP switch can be set with the tip of a ball-point pen or small

screwdriver. Do not use anything that has a sharp edge (e.g.,

tweezers) to set the DIP switch.

Color plate projecting part (There are

four color plate projecting parts.)

Square hole (There are four square

holes.)

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.