•Supports SDH/SONET and Synchronous Ethernet clocks including all FEC rate conversions
•0.35ps RMS Typical Jitter (including spurs): 12kHz to 20MHz
•Operating Modes: Synthesizer, Jitter Attenuator
•Operates from a 10MHz to 50MHz fundamental-mode crystal or a 10MHz to 125MHz external oscillator
•Initial holdover accuracy of +50ppb.
•Accepts up to 2 LVPECL, LVDS, LVHSTL or LVCMOS input clocks
•Accepts frequencies ranging from 8kHz to 875MHz
•Auto and manual clock selection with hitless switching
•Clock input monitoring including support for gapped clocks
•Phase-slope limiting and fully hitless switching options to control output clock phase transients
•Generates four LVPECL / LVDS / HCSL or eight LVCMOS output clocks
•Output frequencies ranging from 8kHz up to 1.0GHz (differential)
•Output frequencies ranging from 8kHz to 250MHz (LVCMOS)
•Integer divider ranging from ÷4 to ÷786,420 for each output
•Programmable loop bandwidth settings from 0.2Hz to 6.4kHz
•Optional fast-lock function
•Four General Purpose I/O pins with optional support for status & control:
•Two Output Enable control inputs provide control over the four clocks
•Manual clock selection control input