Features
• 4TH generation FemtoClock® NG technology
• Universal Frequency Translator (UFT) / Frequency Synthesizer
• Two outputs, individually programmable as LVPECL or LVDS
• Both outputs may be set to use 2.5V or 3.3V output levels
• Programmable output frequency: 0.98MHz up to 1,300MHz
• Zero ppm frequency translation
• Two differential inputs support the following input types:
LVPECL, LVDS, LVHSTL, HCSL
• Input frequency range: 8kHz - 710MHz
• Crystal input frequency range: 16MHz - 40MHz
• Two factory-set register configurations for power-up default state
• Power-up default configuration pin or register selectable
• Configurations customized via One-Time Programmable ROM
• Settings may be overwritten after power-up via I2C
• I2C Serial interface for register programming
• RMS phase jitter at 125MHz, using a 40MHz crystal
(12kHz - 20MHz): 510fs (typical), Low Bandwidth Mode (FracN)
• RMS phase jitter at 400MHz, using a 40MHz crystal
(12kHz - 40MHz): 321fs (typical), Synthesizer Mode (Integer FB)
• Output supply voltage modes:
VCC/VCCA/VCCO
3.3V/3.3V/3.3V
3.3V/3.3V/2.5V (LVPECL only)
2.5V/2.5V/2.5V
• -40°C to 85°C ambient operating temperature
• Available in lead-free (RoHS 6) package