Features
■ Non-Sensitizing per ISO:10993
■ Easy to Handle/Apply
■ Soft & Cushioning¹
■ ETO and Radiation Sterilization Compatible
■ Opaque Ivory color
■ Conformable1 Composition: Tape is ~34 mils [0.9 mm] thick without release liner target thickness. Backing 32 mil (0.8 mm) Ivory PVC Closed-Cell Foam2 Adhesive Non-tackified Acrylic-based, developed for skin contact Liner 65 lbs. Bleached Super Calendered Kraft paper, silicone release on one side, 4 mils (0.1 mm) Please note - The following technical information should be considered representative or typical only and should not be used for specification purposes. Typical Properties: *3M test methods are available upon request. Adhesion to Stainless Steel*, 180 deg 9 ounces/inch width (255 gm/25mm width) (10 N/25 mm) Liner Release*, average 15 grams/inch width (0.15 N/25 mm width) Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length, Maximum 200 yards (183 meters) Width, Maximum 48 inches (122 cm) + 1/16 inch (1.5 mm) Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 9 inches (20 cm) 3 per 1-75 yards (1 - 69 meters) 5 per 76 - 145 yards (70 - 133 meters) 7 per 146 – 200 yards (134 - 183 meters) Information on the splice frequency in roll widths greater than 8 inches (20 cm) is available upon request. Recommended Storage and Rollstock Shelf Life: Product as supplied in original packaging will maintain stated properties for a period of two (2) years from date stamped on shipping container when stored at temperatures of 50-80ºF (10-27ºC) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information. 1Conditions based on 3M internal studies may not be representative of actual end use/performance and we recommend our OEM customers run their own studies using their device design. 2 May require barrier coat/primer to allow ink anchorage for printing.