VLS201610E datasheet(8/50 Pages) SII

No. de pieza	VLS201610E

Descripción Electrónicos	STEP-UP, SUPER-SMALL PACKAGE, 1.2 MHz PWM / PFM SWITCHABLE SWITCHING REGULATOR

PDF	50 Pages

Scroll/Zoom	100%

Fabricante Electrónico	SII [Seiko Instruments Inc]

Página de inicio	http://www.sii.co.jp

Logo

8 / 50 page

STEP-UP, SUPER-SMALL PACKAGE, 1.2 MHz PWM/PFM SWITCHABLE SWITCHING REGULATOR

S-8363 Series

Rev.2.0_01



Operation

1. Switching control method

The S-8363 Series switching regulator automatically switches between the pulse width modulation method (PWM)

and pulse frequency modulation method (PFM) according to the load current.

A low ripple power can be supplied by operating on PWM control for which the pulse width changes up to 88% in

the range where the output load current is large.

The S-8363 Series operates on PFM control when the output load current is small and the pulses are skipped

according to the amount of the load current. Therefore, the oscillation circuit intermittently oscillates, reducing the

self-current consumption. This prevents decrease in efficiency when the output load current is small. The ripple

voltage during the PFM control is very small, so that the S-8363 Series realizes high efficiency and the low-noise

power supply.

The point at which PWM control switches to PFM control varies depending on the external element (inductor, diode,

etc.), input voltage value, and output voltage value, and this method achieves high efficiency in the output load

current of about 100

μA.

VLS201610E Datasheet(PDF) 8 Page - Seiko Instruments Inc