LIGITEK ELECTRONICS CO.,LTD.

Property of Ligitek Only

Page 11/12

Precautions For Use:

Storage time:

2.Once the package is opened, the products should be used within a week.

Otherwise, they should be kept in a damp proof box with descanting agent.

Considering the tape life, we sDGMgest our customers to use our products within

they should be treated at 60 ±

℃

ESD(Electrostatic Discharge):

Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic

glove is recommended when handing these LED. All devices, equipment and machinery must be properly

grounded.

Drive Method:

LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into

the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series

with the LED.

Consider worst case voltage variations than could occur across the current limiting resistor. The forward

current should not be allowed to change by more than 40% of its desired value.

Cleaning:

Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.

(A) Recommended circuit.

(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.

Circuit model A

LED

Circuit model B

LED

PART NO. LG-195URL/IR-R1-CT