HDMIULC6-4SC6Y

Technical information

Doc ID 018879 Rev 2

9/12

Figure 16.

Analog crosstalk measurements

Figure 16 gives the measurement circuit for the analog application. In usual frequency range

of analog signals (up to 240 MHz) the effect on disturbed line is less than -45 dB (see

Figure 17).

Figure 17.

Analog crosstalk results

As the HDMIULC6-4SC6Y is designed to protect high speed data lines, it must ensure a

good transmission of operating signals. The frequency response (Figure 5.) gives

attenuation information and shows that the HDMIULC6-4SC6Y is well suitable for data line

transmission up to 3.2 Gb/s.

NETWORK ANALYSER

PORT 2

NETWORK ANALYSER

PORT 1

TEST BOARD

NETWORK ANALYSER

PORT 2

NETWORK ANALYSER

PORT 1

TEST BOARD

100.0k

1.0M

10.0M

100.0M

1.0G

- 120.00

- 90.00

- 60.00

- 30.00

0.00

dB

F (Hz)