L6732C datasheet(13/32 Pages) STMICROELECTRONICS

No. de pieza	L6732C

Descripción Electrónicos	Soft-start and inhibit

PDF	32 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

13 / 32 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

L6732C

5 Device description

13/32

5.5

Error amplifier

5.6

Soft start

When both VCC and VIN are above their turn-ON thresholds (VIN is monitored by the OCH pin)

the start-up phase takes place. Otherwise the SS pin is internally shorted to GND. At start-up, a

ramp is generated charging the external capacitor CSS with an internal current generator. The

initial value for this current is 35µA and charges the capacitor up to 0.5V. After that it becomes

10µA until the final charge value of approximately 4V (see Figure 6.). The reference of the error

amplifier is clamped with this voltage (VSS) until it reaches the programmed value. The Device

can always sink current

Figure 5.

Error Amplifier Reference

Figure 6.

Device start-up: Voltage at the SS pin.

VCC

VIN

Obsolete

Product(s)

- Obsolete

Product(s)

L6732C Datasheet(PDF) 13 Page - STMicroelectronics