VJ Non-Magnetic Series for Epoxy Bonding

www.vishay.com

Vishay Vitramon

Revision: 05-Dec-16

1

Document Number: 45128

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Surface Mount Multilayer Ceramic Chip Capacitors

for Non-Magnetic Applications (Epoxy Bonding)

FEATURES

• Manufactured with non-magnetic materials

• Safety screened for magnetic properties

•C0G (NP0) and X7R / X5R dielectrics

• Wide range of case sizes, voltage ratings,

and capacitance values

• Suitable for conductive epoxy bonding

• Wet built process

• Reliable Noble Metal Electrode (NME) system

• Material categorization: for definitions of compliance

APPLICATIONS

• Magnetic Resonance Imaging (MRI)

• Medical test and diagnostic equipment

• Hi-rel medical systems

• Hi-rel aviation systems

• Laboratory analysis systems

• Navigation and electronic test equipment

• Audio amplifiers

ELECTRICAL SPECIFICATIONS

NON-MAGNETIC C0G (NP0)



GENERAL SPECIFICATION

Note

Electrical characteristics at +25 °C unless otherwise specified

Operating Temperature: -55 °C to +125 °C

Capacitance Range: 1.0 pF to 39 nF

Temperature Coefficient of Capacitance (TCC):



0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C

Dissipation Factor (DF):



1 MHz for values

 1000 pF

1 kHz for values > 1000 pF

Insulating Resistance:



at +25 °C 100 000 M

 min. or 1000 F whichever is less

at +125 °C 10 000 M

 min. or 100 F whichever is less

Aging: 0 % maximum per decade

Dielectric Strength Test:



performed per method 103 of EIA 198-2-E.

Applied test voltages



 200 V

250 % of rated voltage



200 % of rated voltage



150 % of rated voltage



NON-MAGNETIC X7R / X5R



GENERAL SPECIFICATION

Note

Electrical characteristics at +25 °C unless otherwise specified

Operating Temperature: -55 °C to +125 °C

Capacitance Range: 100 pF to 6.8 μF

Temperature Coefficient of Capacitance (TCC):



Dissipation Factor (DF):



 6.3 V, 10 V ratings: 5 % maximum at 1.0 V

 50 V ratings: 2.5 % maximum at 1.0 V

Insulating Resistance:



at +25 °C 100 000 M

 min. or 1000 F whichever is less

at +125 °C 10 000 M

 min. or 100 F whichever is less

Aging Rate: 1 % maximum per decade

Dielectric Strength Test:



performed per method 103 of EIA 198-2-E.

Applied test voltages



 200 V

250 % of rated voltage



min. 150 % of rated voltage



150 % of rated voltage

