H-2/4HD-EM(S/H)

Video in Status

Users can enter this menu to check the video input status.

Video Format

The SDI encoding module supports both “MPEG2” and “H.264” video encoding

formats. Users can enter this menu to select one format from the 2 options.

Press ENTER to shift ‘*’ to ‘►’, and then press UP/DOWN buttons to specify one item and then press

ENTER to confirm. Press MENU to step back to upper level menu. (The operation method is applicable

for rest part.)

Low Delay

This unit can achieve a low time delay from encoding to decoding terminal

end-to-end.

…..……………………………….....

NOTE

……..……..………………………….

The different combination of Video Format, Video Bit-rate, Low Delay Mode, the

Resolution of signal source and Decoding solution adopted on terminal side will have an

impact on the latency.

…………………………………………………………………………………………..……

Video Bit Rate

Users can set the video encoding bit rate manually in this menu.

0.5~19.5Mbps for H.264 encoding

1~19.5Mbps for MPEG-2 encoding

CC Switch

CC refers to Closed Caption.

Users can select a standard for the CC from the 2 options in this menu.

MPEG2

H.264

Normal

Mode 1

Video Bit Rate

14.000 Mbps

►

EIA 608

EIA 708