Page 2 of 2

The information contained herein does not form part of a

contract and is subject to change without notice. ARCOL

operate a policy of continual product development, therefore,

specifications may change.

It is the responsibility of the customer to ensure that the

component selected from our range is suitable for the intended

application. If in doubt please ask ARCOL.

ARCOL UK Limited,

Threemilestone Ind. Estate,

Truro, Cornwall, TR4 9LG, UK.

T +44 (0) 1872 277431

F +44 (0) 1872 222002

E sales@arcolresistors.com

www.arcolresistors.com

3/13.25

Dimensions (mm)

TFBR100L

TFBR100S

TFBR300

TFBR900

Types

Length

Width

Thickness

TFBR100L

61.0

41.0

1.0

TFBR100S

55.0

43.0

1.0

TFBR300

70.0

61.0

1.0

TFBR900

188.0

75.0

1.0

Mounting Notes: It is recommended that the resistor is mounted to a heatsink with a surface finish of <6.3μm with a flatness of

<0.05mm. Thermal grease (e.g. Dow Corning DC340 or equivalent) should also be applied between heatsink and resistor.

Torque: The resistor should be mounted using an M4/M5 screw head bolt, torqued to a maximum of 6Nm.

Cable specifications: AWG 20 - 0,519mm² wire Ø, UL style 1015, 105°C, 600V, 100mm length but other length available on request.

Push-on terminals: 5.5x2.8mm, 0.8 mm thick

DATA SHEET

Power resistor (stainless steel)

Model PLR 300

Metallux AG

page3 / 3

Robert-Bosch-Str. 29

Tel. +49 (0) 7195/5980-0

www.metallux.de

date: 10/2011

D-71397 Leutenbach

Fax +49 (0) 7195/5980-300

info@metallux.de

Copyright 2011 by Metallux

Drawing

Substrate thickness 1 ± 0,2

How to order

PLR 300.70.61 100R ± 10 % <electrical terminal>

Specifications subject to change without notice.

Soldering lead free

Melting point 217°C

PLR 300.70.61

Metallux AG

page 3 of 3

Robert-Bosch-Str. 29

Tel. +49 (0) 7195/5980-0

www.metallux.de

Stand: 10/2011

D-71397 Leutenbach

Fax +49 (0) 7195/5980-300

info@metallux.de

Copyright 2011 by Metallux

Drawing

PLR 900.188.75

Substrate thickness1,2 ± 0,2 mm

Specifications subject to change without notice

(1) other values on request

(2) other cables or terminals on request

How to order

PLR 900.188.75 100R ±10%

DATA SHEET

Power resistors (stainless steel)

Model: PLR 900

Page 3/3

Metallux AG

info@metallux.de

Robert-Bosch-Str. 29

Tel. +49 (0) 7195/5980-0

www.metallux.de

D-71397 Leutenbach - Germany

Fax. +49 (0) 7195/5980-300

Copyright 10/2011 by Metallux

Power Resistor

Stainless steel

PLR 100

Drawing

PLR 100.61.41

PLR 100.55.43

Substrate thickness 1 ± 0,2

How to order

PLR 100.61.41 100 R ± 10% <electrical terminal >

Specifications subject to change without notice.

Soldering lead free

Melting point 217°C

Soldering lead free

Melting point 217˚C