UCS1003-1 datasheet(49/138 Pages) MICROCHIP

No. de pieza	UCS1003-1

Descripción Electrónicos	USB Port Power Controller with Charger Emulation

PDF	138 Pages

Scroll/Zoom	100%

Fabricante Electrónico	MICROCHIP [Microchip Technology]

Página de inicio	http://www.microchip.com

Logo

49 / 138 page

 2014-2015 Microchip Technology Inc.

DS20005346B-page 49

UCS1003-1/2/3

7.5.2

LATCHED FAULT HANDLING

When the LATCH control is high, latch Fault handling is

used. When an error condition is detected, the

UCS1003-1/2/3 will enter the Error power state and

assert the ALERT# pin. Upon command from the host

controller (by toggling the PWR_EN control from

enabled to disabled or by clearing the ERR bit via

SMBus), the UCS1003-1/2/3 will check error conditions

once and restore Active operation if error conditions no

longer exist. If an error condition still exists, the host

controller is required to issue the command again to

check error conditions.

FIGURE 7-1:

Error Recovery Timing (Short-Circuit Example).

tRST

VBUS

IBUS

Short Applied

ITST

tDISCHARGE

ITST

VTEST

Short Detected,

VBUS Discharged,

Enter Error State

Check Short Condition,

Short Still Present,

Return to Error State

Wait tCYCLE

Check Short Condition,

Short Removed,

Return to Normal

Operation

tCYCLE

tRST

UCS1003-1 Datasheet(PDF) 49 Page - Microchip Technology