12

TUSB211, TUSB211I, TUSB211-Q1

SLLSEO0C – MAY 2015 – REVISED JUNE 2016

www.ti.com

Product Folder Links: TUSB211 TUSB211I TUSB211-Q1

Submit Documentation Feedback

Copyright © 2015–2016, Texas Instruments Incorporated

10 Layout

10.1 Layout Guidelines

There is no need to break the USB signal trace. Thus, even with the TUSB211 powered down, or not populated,

the USB link is still fully operational. To avoid the need for signal vias, routing the High Speed traces directly

underneath the TUSB211 package, as illustrated in the PCB land pattern shown in Figure 8, is recommended.

Although the land pattern shown below has matched trace width to pad width, optimal impedance control is

based on the user's own PCB stack-up. It is recommended to maintain 90

Ω differential routing underneath the

device.

All dimensions are in millimetres (mm).

10.2 Layout Example

Figure 8. DP and DM Routing Underneath Device Package