DS89C430 datasheet(33/48 Pages) DALLAS

33 / 48 page

DS89C430/DS89C440/DS89C450 Ultra-High-Speed Flash Microcontrollers

33 of 48

Table 10. Page Mode 2, Data Memory Cycle Stretch Values (PAGES1:PAGES0 = 11)

RD/WR PULSE WIDTH (IN NUMBER OF OSCILLATOR CLOCKS)

MD2:MD0

STRETCH

CYCLES

4X/

2X, CD1,

CD0 = 100

4X/

2X, CD1,

CD0 = 000

4X/

2X, CD1,

CD0 = X10

4X/

2X, CD1,

CD0 = X11

000

0.5

2048

001

4096

010

8192

011

12,288

100

16,384

101

20,480

110

24,576

111

28,672

As shown in the previous tables, the stretch feature supports eight stretched external data-memory access options,

which can be categorized into three timing groups. When the stretch value is cleared to 000b, there is no stretch on

external data memory access, and a MOVX instruction is completed in two basic memory cycles. When the stretch

value is set to 1, 2, or 3, the external data memory access is extended by 1, 2, or 3 stretch memory cycles,

respectively. Note that the first stretch value does not result in adding four system clocks to the control signals. This

is because the first stretch uses one system clock to create additional address setup and data bus float time and

one system clock to create additional address and data hold time. When using very slow RAM and peripherals, a

larger stretch value (4–7) can be selected. In this stretch category, two stretch cycles are used to create additional

setup (the ALE pulse width is also stretched by one stretch cycle for page miss) and one stretch cycle is used to

create additional hold time. The following timing diagrams illustrate the external data memory access at divide-by-1

system clock mode (CD1:CD0 = 10b).

Figure 12 illustrates the external data-memory stretch-cycle timing relationship when PAGEE = 1 and

PAGES1:PAGES0 = 01. The stretch cycle shown is for a stretch value of 1 and is coincident with a page miss.

Note that the first stretch value does not result in adding four system clocks to the

RD/WR control signals. This is

because the first stretch uses one system clock to create additional setup and one system clock to create

additional hold time.

Figure 13 shows the timing relationship for a slow peripheral interface (stretch value = 4). Note that a page hit data

memory cycle is shorter than a page miss data memory cycle. The ALE pulse width is also stretched by a stretch

cycle in the case of a page miss.

The stretched data memory bus cycle timing relationship for PAGES = 11 is identical to nonpage mode operation

since the basic data memory cycle always contains four system clocks in this page mode operation.

DS89C430 Datasheet(PDF) 33 Page - Dallas Semiconductor

DS89C430 Datasheet(HTML) 33 Page - Dallas Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Descarga

Enlace URL