VT800 datasheet(14/76 Pages) PERKINELMER

No. de pieza	VT800

Descripción Electrónicos	Photoconductive Cells and Analog Optoisolators (Vactrols)

PDF	76 Pages

Scroll/Zoom	100%

Fabricante Electrónico	PERKINELMER [PerkinElmer Optoelectronics]

Página de inicio	http://www.perkinelmer.com

Logo

14 / 76 page

Photoconductive Cell Typical Characteristic Curves

@ 25°C Type Ø Material

Type Ø Material

This is a general purpose material. Its characteristics include a good temperature coefficient and fast response time, especially at very

low light levels. Cells of this type have relatively low dark history. Type Ø material is often used in lighting controls such as nightlights,

and security lighting.

The resistance for any standard catalog cell is controlled at only one light level. If the resistance at other light levels is a concern,

please contact the factory.

To obtain the typical resistance versus illumination characteristic

for a specific part number:

1. Look up 2 footcandle resistance in table.

2. Insert resistance given and draw a curve through that point

and parallel to the closest member of the family of curves

shown for the appropriate type of photo-sensitive material.

Resistance vs. Illumination

Response Time vs. Illumination

(Rise Time)

Response Time vs. Illumination

(Decay Time)

VT800 Datasheet(PDF) 14 Page - PerkinElmer Optoelectronics