SS259

CMOS Omnipolar High Sensitivity Micropower Hall Switch

2

V3.10

Nov 1, 2013

Typical Application Circuit

SEC's pole-independent sensing technique allows for operation with either a north pole or south pole magnet

orientation, enhancing the manufacturability of the device. The state-of-the-art technology provides the same

output polarity for either pole face.

It is strongly recommended that an external bypass be connected (in close proximity to the Hall sensor) between

the supply and ground of the device to reduce both external noise and noise generated by the chop-

per-stabilization technique. This is especially true due to the relatively high impedance of battery supplies.

Internal Timing Circuit

Awake Taw: 175

μs

Period

Sleep Tsl: 70ms

Time

Current

0

Sample & Output

Latched