PI3HDMI511 datasheet(14/16 Pages) PERICOM

No. de pieza	PI3HDMI511

Descripción Electrónicos	HDMI1.4 Redriver Source-side Application

PDF	16 Pages

Scroll/Zoom	100%

Fabricante Electrónico	PERICOM [Pericom Semiconductor Corporation]

Página de inicio	http://www.pericom.com

Logo

14 / 16 page

www.pericom.com

P-0.2

07/10/12

All trademarks are property of their respective owners.

PI3HDMI511

HDMITM1.4 Redriver for Source-side Application

Recommended Power Supply Decoupling Circuit

Figure 5 is the recommended power supply decoupling circuit configuration. It is recommended to put a 0.1μF decoupling capacitors

on each VDD pin of our part. Four 0.1μF decoupling capacitors are put in Figure 5 with an assumption of only four VDD pins on our

part.

On top of 0.1μF decoupling capacitor on each VDD pin, it is recommended to put a

10μF decoupling capacitor near our part’s VDD for stabilizing the power supply for our part. Ferrite bead is also recommended for

isolating the power supply for our part and other power supplies in other parts of the circuit. But, it is optional and depends on the

power supply conditions of other circuits.

Figure 5 Recommended Power Supply Decoupling Circuit Diagram

12-0185

PI3HDMI511 Datasheet(PDF) 14 Page - Pericom Semiconductor Corporation