2.0 Applications Information

(Continued)

gain error sample/hold specs are included in the ADC10154/

ADC10158’s total unadjusted, linearity, gain and offset error

specifications, while the hold settling time is included in the

A/D’s maximum conversion time specification. The hold

droop rate can be thought of as being zero since an unlim-

ited amount of time can pass between a conversion and the

reading of data. The data is lost after a new conversion has

been completed.

Protecting the Analog Inputs

DS011225-25

Diodes are 1N914.

The protection diodes should be able to withstand the output current of the op amp under current limit.

Zero-Shift and Span-Adjust for Signed or Unsigned, Unipolar, Single-Ended

Multiplexer Assignment, Analog Input Range of 2V

≤ V

DS011225-26

*1% resistors

www.national.com

21