7

www.pericom.com

PI6LC48P03

Rev. C

5/7/2015

PI6LC48P03

3-Output LVPECL Networking Clock Generator

Recommendations for Unused Input and Output Pins

Inputs:

Crystal Inputs:

For applications not requiring the use of the crystal oscillator input, both XTAL_IN and XTAL_OUT can be left floating. A 1kΩ

resistor can be tied from XTAL_IN to ground for additional protection.

Ref_IN Input:

For applications not requiring the use of the clock, it can be left floating. A 1kΩ resistor tied from the Ref_IN to ground can provide

additional protection.

LVCMOS Control Pins:

All control pins have internal pulldowns/pullups; A 1kΩ resistor tied from internal pulldown control pins to ground, and a 4.7kΩ

tied from internal pullup control pins to power supply can provide additional protection.

Outputs:

LVPECL Outputs:

All unused LVPECL outputs can be left floating.

Crystal Input Interface

The clock generator has been characterized with 18pF parallel resonant crystals. The capacitor values shown in the figure below

were determined using a 31.25MHz or 26.041666MHz, 18pF parallel resonant crystal and were chosen to minimize the ppm error.

C1

33pF

C2

27pF

XTAL_IN

XTAL_OUT

X1

18pF Parallel Crystal

15-0059