Overview

 2015 Microchip Technology Inc.

Advance Information

DS50002366A-page 13

1.3

CONTENTS

The package kit contents contain the following tools as listed in Table 1-1.

1.4

BOARD CONFIGURATION

Prior plugging the module into the motherboard's socket, ensure that one of the current

measure jumpers, CUR1 or CUR2, are shunted.

PICtail Daughter Board can be powered from two sources, either from one of the

PICtail headers or from USB. Both power sources can be active at the same time.

RF antennas must be connected to the SMA connectors prior attaching power to the

board.

Ensure that the applied power supply voltage does not exceed the board limits.

Figure 1-2, Figure 1-3, and Figure 1-4 show the connection to various development

boards.

FIGURE 1-2:

RN2483 LORA™ TECHNOLOGY PICtail™/PICtail PLUS

DAUGHTER BOARD CONNECTED TO EXPLORER 16

DEVELOPMENT BOARD

TABLE 1-1:

RN2483 LORA™ TECHNOLOGY PICtail™/PICtail PLUS

DAUGHTER BOARD

Description

Part Number

RN2483 LoRa™ Technology PICtail™/PICtail Plus

Daughter Board

RN-2483-PICtail

USB Cable

—

433 MHz antenna

—

868 MHz antenna

—