AS5147P-HTST datasheet(4/40 Pages) AMSCO

No. de pieza	AS5147P-HTST

Descripción Electrónicos	14-Bit On-Axis Magnetic Rotary Position Sensor with 12-Bit Binary

PDF	40 Pages

Scroll/Zoom	100%

Fabricante Electrónico	AMSCO [ams AG]

Página de inicio	http://www.ams.com

Logo

4 / 40 page

Page 4

ams Datasheet

Document Feedback

[v1-01] 2015-May-12

AS5147P − Pin Assignment

Note(s) and/or Footnote(s):

1. Floating state of a digital input is not allowed.

2. If SPI is not used, a Pull up resistor on CSn is required.

3. If SPI is not used, a Pull down resistor on CLK and MOSI is required.

4. If SPI is not used, the pin MISO can be left open.

5. If ABI, UVW or PWM is not used, the pins can be left open.

W/PWM

Digital output

Commutation signal W or PWM-encoded output

Digital output

Commutation signal V

Digital output

Commutation signal U

VDD

Power supply

5V power supply voltage for on-chip regulator

VDD3V3

Power supply

3.3V on-chip low-dropout (LDO) output. Requires an

external decoupling capacitor (1

μF)

GND

Power supply

Ground

Digital output

Incremental signal I (index) or PWM

Pin Number

Pin Name

Pin Type

Description

AS5147P-HTST Datasheet(PDF) 4 Page - ams AG